Click on the image to check the artwork
This nema 24 stepper motor with step angle 1.8deg and size 60x60x56mm. It has 4 wires, rated current 3.0A, with holding torque 1.6Nm (226.6oz.in).
Specifications
| Part Number | DT60HS56-3016 |
Step Angle(deg.) |
1.8 |
Body Length(mm) |
56 |
Rated Current(A) |
3.0 |
Phase Resistance(ohm) |
0.8 |
Phase Inductance(mH) |
2.4 |
Holding Torque(Nm) |
1.6 |
Rotor Intertia(g.cm²) |
350 |
No. Of Leads |
4 |
Weight(g) |
580 |
Shaft Diameter(mm) |
8 |
Wiring Connection
Motor Drawing
http://www.dtdmotion.com/